Amaryllo Community

Answer of your leaving message
Purchase Country: kickstarter project
Duration in-use of camera: couple months
Mobile device OS version ( find in app setting ) : latest version from google Play store
App version ( find in app setting ) :
Problem Type: Unit not working
Occurrence Frequency: all the time
Problem Description: Took my iCam HD in use after years of storage. Now powering unit only lights up blue led and nothing else happens. Reset button does nothing.

by Pekka


Dear Pekka, thank you for the mail.

First, exchange one set of AC adapter (5v2a or above) and USB cable to test first to exclude the accessory causes.

If not because of this (accessory), Rebuild the firmware from the external SD card : This is a manual re-build firmware procedure for your reference (recovery and cure rate is more than 90%)
Download file https://www.dropbox.com/s/mzj48a2o2hafm5h/iCam_iBabi_v3716.rar?dl=0
( If you do not know how to unzip a file, you may download this file and folder
directly to the SD card here. )
https://drive.google.com/file/d/1zarKi9EcIhDdo2xJpJrp9pEgRfpNnzVQ/view?usp=sharing
https://drive.google.com/drive/folders/1YKfGJ2RHGZWOKfzF7ZN_8FEDlmYKzjyk?usp=sharing

Unplug power of camera
- Uncompress/unzip it to ROOT directory of a MicroSD card [ PC->SD ] ( one folder (codeimg) and one file _rescue00 )
- Insert the card to the camera
Demo video : https://drive.google.com/file/d/1RfHAX_pm6nBKFtWQJ0qwozQ5zwBXD89N/view?usp=sharing
- Plug power cord of it (power on). CAM will auto detect the codes in the Card (a beep) to do the update ( blue light is on )
- Wait till front blue and green leds are blinking. (About 2-3 minutes)
- Unplug power cord
- Take card out.
- Plug power cord again and the blue led will keep blink ( waiting for installation mode )

Installation: https://www.youtube.com/watch?v=V-j_OzXsANo , If you are successful, please erase the card for normal use.

PS – this is what you see during the process

Insert the card with unzipped files
Plug in power
Short beep ( camera detect and read the files ) in 5 seconds
After about 40 seconds Two short beeps ( writing complete )
Blue and Green lights blinking – done ( wrote in )
Unplug the power
Remove the SD and erase/delete it for future use.